Intergrain - Ultraclear (Satin)

Product Description

Intergrain UltraClear Interior is a tough, clear, water based finish for use on interior timber. Incorporating UV absorbers, UltraClear Interior provides greater protection against the colour change of timbers by shielding against the UV rays. UltraClear Interior resists abrasion, water and most household chemicals, is low odour and unlike oil based coatings will not yellow. Easy to apply and fast drying UltraClear Interior allows for several coats to be applied in one day. Available in satin.

Being water based, UltraClear Interior emits significantly less VOC’s (volatile organic compounds) into the atmosphere than traditional oil based interior clear finishes. This makes UltraClear Interior safer to use, and much gentler on the environment.

Note: UltraClear Interior is not suitable for coating areas subject to foot traffic.

  • Where to use: Use on all interior timber including doors, windows, furniture and joinery. UltraClear Interior is ideal for maintaining the timber’s natural colour, especially with pale timbers such as Pine, Victorian Ash and Cedar. Note: UltraClear Interior is not suitable for heavy wear surfaces (such as floors) for these areas use Intergrain UltraFloor™.
  • Coverage m2/L: 12
  • Number of coats: 2
  • Sanding time (optional): 3 Hours. Lightly sand between coats to remove any raised grain and imperfections
  • Recoat time: 3 hours
  • Dry time: Light traffic 12 hours; Minimum harden before use 24 hours; fully cured 7 days
  • Clean up: Water
  • Size
    View Colour Palette

    Related Products